ForTwo L3-1.0L (2009)
000 589 13 99 00, Wiring harness repair kit, basic
220 589 01 99 50, Blade holder with clamping pliers
220 589 01 99 60, MQS blade
Unfasten secondary release on version with retainer housing
1
Using a suitable tool (1), pry the clutch housing (3) from the main housing (2) in direction shown by arrow.
During assembly, make sure that the gasket (4) is not damaged. Otherwise, water entering the connector may lead to contact problems.
Unfasten secondary release on version with cap