Baja F4-2.5L SOHC (2003)
5. On the "System Selection Menu" display screen, select the {Cruise Control} and press the [YES] key.
6. Press the [YES] key after displayed the information of engine type.
7. On the "Cruise Control Diagnosis" display screen, select the {Current Data Display & Save} and press the [YES] key.
8. Make sure that normal indication is displayed when controls are operated as indicated below:
-
Depress/release the brake pedal. (Stop light switch and brake switch turn ON or OFF.)
-
Turn ON/OFF the "SET/COAST" switch.
-
Turn ON/OFF the "RESUME/ACCEL" switch.
-
Depress/release the clutch pedal. (MT)
-
Set the selector lever to P or N. (AT)
NOTE:
-
For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.
-
For detailed concerning diagnostic trouble codes (DTCs), refer to the List of Diagnostic Trouble Code (DTC).
Symptom Chart Part 1