Baja F4-2.5L SOHC (2003)
21. Loosen clamp which holds front right side fuel hose to injector pipe and remove the pipe from clamp.
22. Remove fuel injector pipe.
23. Remove bolt which installs fuel pipes on intake manifold.
24. Remove fuel pipe assembly and pressure regulator, from intake manifold.
ASSEMBLY
1. Install fuel pipe assembly and pressure regulator, etc. to intake manifold.
2. Tighten bolt which installs fuel pipes on intake manifold.
Tightening torque: 4.9 N.m (0.5 kgf-m, 3.6 ft-lb)
3. Connect right side fuel hose to injector pipe, and tighten clamp screw.
4. Install fuel injector pipe.
5. Connect left side fuel hose to injector pipe, and tighten clamp screw.