Baja F4-2.5L SOHC (2003)
4. Tighten nuts which hold front exhaust pipe onto cylinder heads.
Tightening torque: 30 Nm (3.1 kgf-m, 22.4 ft. lbs.)
5. Install under cover.
6. Tighten bolts which install front and center exhaust pipe assembly to rear exhaust pipe.
Tightening torque: 18 Nm (1.8 kgf-m, 13.0 ft. lbs.)
7. Tighten bolt which holds front and center exhaust pipe assembly to hanger bracket.
Tightening torque: 35 Nm (3.6 kgf-m, 26.0 ft. lbs.)
8. Lower the vehicle.
9. Connect rear oxygen sensor connector.
10. Connect front oxygen (A/F) sensor connector.