Baja F4-2.5L SOHC (2003)
1. Clean pipe and connector, if they are covered with dust.
2. Hold connector (A) and push retainer (B) down.
3. Pull out connector (A) from retainer (B).
CAUTION: Replace retainer with new ones.
INSTALLATION
1. Connect quick connector on fuel delivery and return line.
CAUTION:
-
Always use a new retainer.
-
Make sure that the connected portion is not damaged or has dust. If necessary, clean seal surface (A) of pipe.
1. Set new retainer (B) to connector (A).
2. Push pipe into connector completely.
NOTE: At this time, two clicking sounds are heard.