subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Fuel Filler Hose|Removal and Installation|Page 1890 > < Fuel Filler Hose|Removal and Installation|Page 1888
Page 3
background image

9. Drain fuel from fuel tank. Set a container under the vehicle and remove drain plug from fuel tank.

10. Tighten fuel drain plug and then install front right side tank cover.

Tightening torque: 26 N.m (2.65 kgf-m, 19.2 ft-lb)

Tightening torque: 18 N.m (1.8 kgf-m, 13.0 ft-lb)

11. Remove rear exhaust pipe and muffler.

NOTE:  To facilitate removal, apply a coat of SUBARU CRC to matching area of rubber cushions in advance.

SUBARU CRC (Part No. 004301003)

1. Separate rear exhaust pipe from center exhaust pipe.

Fuel Filler Hose|Removal and Installation|Page 1890 > < Fuel Filler Hose|Removal and Installation|Page 1888