Baja F4-2.5L SOHC (2003)
3. Align holes in fuel filler pipe neck and set cup (B), and tighten screws.
NOTE: If edges of rubber packing are folded toward the inside, straighten it with a screwdriver.
4. Tighten bolt which holds fuel filler pipe on body.
Tightening torque: 7.5 N.m (0.75 kgf-m, 5.4 ft-lb)
5. Insert evaporation hose approximately 25 to 30 mm (0.98 to 1.18 in) into the lower end of evaporation pipe and hold clip.
L = 27.5 ± 2.5 mm (1.083 ± 0.098 in)