Baja F4-2.5L SOHC (2003)
Transmission Temperature Sensor/Switch: Service and Repair
Shift Solenoids, Duty Solenoids and ATF Temperature Sensor
REMOVAL
SHIFT SOLENOIDS AND DUTY SOLENOIDS
1. Lift-up the vehicle.
2. Clean the transmission exterior.
3. Replace the gasket with a new one, and tighten the drain plug.
4. Drain the ATF completely.
Tightening torque: 25 Nm (2.5 kgf-m, 18.1 ft. lbs.)
5. Remove the oil pan.
6. Disconnect the solenoid and sensor connectors. Remove the connectors from clip and disconnect the connectors.