Baja F4-2.5L SOHC (2003)
INSTALLATION
Install in the reverse order of removal.
Side Airbag Harness
REMOVAL
1. Turn ignition switch OFF.
2. Disconnect the ground cable from the battery, and wait for at least 20 seconds before starting work.
3. Remove front seat.
4. Remove console box.
5. Roll up floor mat, and then disconnect two 12-pin yellow connectors from airbag control module.
6. Disconnect connector from side airbag sensor.
7. Detach clips, and then remove side airbag harness.
INSTALLATION
Install in the reverse order of removal.