Baja F4-2.5L SOHC (2003)
Steering Angle Sensor: Service and Repair
Steering Angle Sensor
REMOVAL
1. Disconnect battery around cable.
2. Remove airbag module.
WARNING: Always refer to "Airbag System" before performing airbag module service (if so equipped). <Ref. to CAUTION, General
Description.>
3. Remove steering wheel nut, then draw out steering wheel from shaft using steering puller.
NOTE: Steering wheel must be removed at the straight ahead position.
4. Remove the screw securing lower steering column cover.
5. Remove two screws securing upper steering column cover.