Baja F4-2.5L SOHC (2003)
13. Remove retainer and roller (A) from housing.
CAUTION: Be careful not to drop retainer and roller.
14. Remove coil spring (A) from magnetic switch (B).
ASSEMBLY
Assemble in the reverse order of disassembly. Observe the following:
1. Before assembling, apply grease to the points shown in "COMPONENT PARTS".
2. Assembling magnetic switch, clutch, and housing
To assemble, first install clutch to magnetic switch, then install idle gear, and finally install clutch.
CAUTION:
-
Do not forget to install steel ball and coil spring to clutch.
-
Attach bearing to idle gear beforehand.