Baja F4-2.5L SOHC (2003)
Starter Motor: Testing and Inspection
INSPECTION
ARMATURE
1. Check commutator for any sign of burns of rough surfaces or stepped wear. If wear is of a minor nature, correct it by using sand paper.
2. Run-out test
Check the commutator run-out and replace if it exceeds the limit.
Commutator run-out:
Standard 0.02 mm (0.0008 in), or less
Service limit
Less than 0.05 mm (0.0020 in)
3. Depth of segment mold
Check the depth of segment mold.
Depth of segment mold: 0.6 mm (0.024 in)
Limit 0.2 mm (0.008 in)