Baja F4-2.5L SOHC (2003)
4. Place the inhibitor switch on specified position, and then tighten the bolts for inhibitor switch using ST.
ST 499267300 STOPPER PIN
Tightening torque: 3.5 Nm (0.36 kgf-m, 2.6 ft. lbs.)
5. Install the select cable to range select lever.
6. Install the plate assembly to transmission.
Tightening torque: T: 25 Nm (2.5 kgf-m, 18.1 ft. lbs.)
7. Install the washer and snap pin to range select lever.
8. Install the front and center exhaust pipes.
9. Lower the vehicle.
10. Install the inhibitor switch connector to stay.