Baja F4-2.5L SOHC (2003)
Shift Cable: Testing and Inspection
Select Cable
INSPECTION
Check the removed cable and replace if damaged, rusty, or malfunctioning.
1. Check for smooth operation of the cable.
2. Check the inner cable for damage and rust.
3. Check the outer cable for damage, bends, and cracks.
4. Check the boot for damage, cracks, and deterioration.
5. Move the select lever from "P" position to "1 " position. You should be able to feel the detent in each position. If the detent cannot be felt or the
position pointer is improperly aligned' adjust the cable.