Baja F4-2.5L SOHC (2003)
6. Install the rubber seal to the torque converter clutch case.
7. Apply proper amount of liquid gasket to the entire torque converter clutch case mating surface.
Liquid gasket: THREE BOND 1215 (Part No. 004403007)
8. Install the torque converter clutch case assembly without damaging bush and oil seal and secure with six bolts and four nuts.
Tightening torque: 41 Nm (4.2 kgf-m, 30.4 ft. lbs.)
9. Install the pitching stopper bracket and transmission ground cable.
Tightening torque: 41 Nm (4.2 kgf-cm, 30.4 ft. lbs.)
10. Insert inhibitor switch and transmission connector into stay.
11. Install air breather hose.
12. Install the oil cooler pipes.
13. Install the oil charger pipe with O-ring.