Baja F4-2.5L SOHC (2003)
4. Attach the magnet at specified position.
5. Apply proper amount of liquid gasket to the entire oil pan mating surface.
Liquid gasket: THREE BOND 1217B (Part No. K0877YA020)
6. Apply liquid gasket fully to three holes other than screw holes on transmission case.
Liquid gasket: THREE BOND 1217B (Part No. K0877YA020)
7. Install the oil pan.
Tightening torque: 5 Nm (0.5 kgf-m, 3.6 ft. lbs.)
8. Pour ATF into the oil charge pipe.
Recommended fluid: Dexron III type automatic transmission fluid Fluid capacity: Fill the same amount of fluid drained from drain plug hole.
9. Check the level of ATF.
DISASSEMBLY
1. Remove oil strainer from lower control valve body.
NOTE: Arrange the removed bolts in good order to assemble in the same place as disassembly, because the bolts length are different.
2. Remove the duty solenoids, solenoids and sensor from the lower valve body.