Baja F4-2.5L SOHC (2003)
Clutch Disc: Service and Repair
Clutch Disc and Cover
REMOVAL
1. Remove the transmission assembly from vehicle body.
2. Install the ST on flywheel.
ST 499747100 CRANKSHAFT STOPPER
3. Remove the clutch cover and clutch disc.
NOTE:
^
Take care not to allow oil on the clutch disc facing.
^
Do not disassemble either the clutch cover or clutch disc.
INSTALLATION
1. Insert the ST into clutch disc and install them on the flywheel by inserting the ST end into pilot bearing.
NOTE: When installing the clutch disc, be careful to its direction.
ST 499747100 CLUTCH DISC GUIDE
2. Position "0" marks on clutch cover and flywheel 120° apart, and then tighten the clutch cover installation bolts diagonally.