Baja F4-2.5L SOHC (2003)
6. Turn the push rod counter clockwise to lengthen until clutch pedal contacts to stopper bolt.
7. Turn the push rod further 270° counterclockwise to lengthen (arrow direction as shown in the figure).
8. Move the clevis pin in lateral direction to ensure it moves smoothly.
9. Tighten the push rod lock nut.
Tightening torque: 10 Nm (1.0 kgf-m, 7.2 ft. lbs.)
10. Measure the full stroke amount of clutch pedal again.
Specified clutch pedal full stroke: A 130 - 135 mm (5.12 - 5.31 inch)
11. Install the clutch start switch.