Baja F4-2.5L SOHC (2003)
CAUTION: Be sure not to damage oil seals and the friction all surface of sleeve yoke.
NOTE:
^
Be sure to use an empty oil can to catch oil flowing out when removing propeller shaft.
^
Be sure to plug the opening in transmission after removal of propeller shaft.
12. Install the extension cap to transmission.
NOTE: If extension cap is not available, cover the opening with a vinyl bag in order to prevent gear oil or ATF leakage.
INSTALLATION
1. Insert sleeve yoke into transmission and attach center bearing to vehicle body.
Tightening torque: 52 Nm (5.3 kgf-m, 38.3 ft. lbs.)
2. Align matching marks and connect flange yoke and rear differential.
Tightening torque: 31 Nm (3.2 kgf-m, 23.1 ft. lbs.)
3. Install heat shield cover.
4. Install center exhaust pipes.
5. Install rear exhaust pipe and muffler.