Baja F4-2.5L SOHC (2003)
8. Tighten boot bands using ST, torque wrench and socket flex handle.
ST 28099AC000 BOOT BAND PLIER
Tightening torque:
Large boot band 157 Nm (16.0 kgf-m, 116 ft. lbs.) or more
Small boot band 133 Nm (13.6 kgf-m, 98 ft. lbs.) or more
9. Place SFJ boot at the center of shaft.
10. Align alignment marks and install trunnion on shaft.
11. Install snap ring to shaft.
CAUTION: Confirm that the snap ring is completely fitted in the shaft groove.
12. Fill 100 to 110 g (3.53 to 3.88 oz) of specified grease into the interior of SFJ outer race.
13. Apply a coat of specified grease to free ring and trunnion.
14. Align alignment marks on free ring and trunnion and install free ring.
CAUTION: Be careful with the free ring position.