Forester F4-2.5L DOHC Turbo (2007)
Steering Angle Sensor: Service and Repair
Steering Angle Sensor
REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the airbag module.
WARNING: Always refer to "Airbag System" before performing the airbag module service.
3) Remove the steering wheel nut.
NOTE: Steering wheel must be removed at the straight ahead position.
4) Then draw out the steering wheel from shaft using steering puller.
5) Remove the screw securing steering column lower cover.
6) Remove the two screws securing steering column upper cover.
