Forester F4-2.5L DOHC Turbo (2007)
Brake Hose/Line: Service and Repair
Brake Hose
Brake Hose
REMOVAL
FRONT BRAKE HOSE
1) Separate the brake pipe from brake hose. (Always use flare nut wrench and be careful not to deform the flare nut.)
2) Pull out the clamp to remove brake hose.
3) Remove the bolt at strut and union bolt.
REAR BRAKE HOSE (DISC BRAKE)
1) Separate the brake pipe from brake hose.
NOTE: Always use flare nut wrench and be careful not deform the flare nut.
2) Remove the clamp and union bolt.
REAR BRAKE HOSE (DRUM BRAKE)
1) Separate the brake pipe from brake hose using a flare nut wrench.
2) Remove two clamps.