Forester F4-2.5L DOHC Turbo (2007)
INSTALLATION
CAUTION: Before installing the oil pan, clean the mating surface of oil pan and engine block.
1. Make sure that the seals (A) are installed securely on the baffle plate in a direction as shown in the figure below. (Non-turbo model)
2. Install the baffle plate.
Tightening torque: 6.4 Nm (0.65 kgf-m, 4.7 ft. lbs.)
3. Install the oil strainer onto baffle plate.
NOTE: Replace the O-ring with a new one.
Tightening torque: 10 Nm (1.0 kgf-m, 7.2 ft. lbs.)
4. Apply liquid gasket to the mating surfaces, and install the oil pan.
Liquid gasket. Three bond 1207C (Part No.004403012) or equivalent
