Forester F4-2.5L DOHC Turbo (2007)
Camshaft Gear/Sprocket: Service and Repair
Cam Sprocket
REMOVAL
1. Remove the V-belts.
2. Remove the crank pulley.
3. Remove the timing belt cover.
4. Remove the timing belt.
5. Fasten the cam sprocket and remove from the cam shaft using ST.
ST 499207400 CAM SPROCKET WRENCH
ST 499977500 CAM SPROCKET WRENCH
INSTALLATION
1. Fasten the cam sprocket and install to the cam shaft using ST.
NOTE: Do not confuse left and right side cam sprockets during installation.
ST 499207400 CAM SPROCKET WRENCH
Tightening torque: Tighten to 30 Nm (3.0 kgf-m, 21.8 ft. lbs.) of torque, and then tighten further by 45°.
ST 499977500 CAM SPROCKET WRENCH