Forester F4-2.5L DOHC Turbo (2007)
Headlamp Bulb: Service and Repair
Headlight Bulb
REMOVAL
1. HALOGEN TYPE
CAUTION:
-
Because the halogen bulb operates at a high temperature, dirt and oil on the bulb surface reduces the bulb's service life. Hold the flange portion
when replacing the bulb and never touch the glass portion.
-
Dust, moisture, etc. entering the headlight may mal-affect its performance. Therefore, never leave the headlight without a bulb for extended
periods of time.
1. Disconnect the ground cable from battery.
2. Remove the air intake duct (when right side headlight is removed).
3. Disconnect the harness connector.
4. Remove the rubber cap.
5. Remove the light bulb retaining spring to remove the bulb.
2. HID TYPE
CAUTION:
-
Do not operate with wet hands.
-
As the lightening circuit uses high voltage, be sure to confirm that the power supply is turned off before working on it.
-
When replacing the bulb, hold the flange portion and never touch the glass portion.
-
Do not leave the headlight without a bulb for a long time. Dust, moisture, etc. entering the headlight may affect its performance.
1. Disconnect the ground cable from battery.
2. Remove the headlight assembly.