Forester F4-2.5L DOHC Turbo (2007)
9. Check whether or not the AARi retainer has moved from its prescribed position.
10. Using ST1 and ST2, pull the front drive shaft into the required position.
ST1 922431000 AXLE SHAFT INSTALLER ST2 927390000 ADAPTER
11. While pressing the brake pedal, tighten the new axle nut to the specified torque.
Tightening torque: 220 Nm (22.4 kgf-m, 162 ft. lbs.)
CAUTION: Be sure to tighten the axle nut to specified torque. Do not overtighten it as this may damage the wheel bearing.
12. After tightening the axle nut, lock it securely.
