Forester F4-2.5L DOHC Turbo (2007)
2. Remove the AARi boot band and boot.
CAUTION: Be careful not to damage the boot.
3. Remove the retainer from the AARi outer race.
4. Remove the AARi outer race from the shaft assembly.
5. Wipe off grease.
CAUTION: This grease is a special type of grease. Do not mix it with other grease.
6. Place alignment marks on the trunnion and shaft.
7. Remove the snap ring and trunnion.
8. Remove the spider.
CAUTION: Be sure to wrap shaft splines with vinyl tape to protect the boot from scratches.
