Forester F4-2.5L DOHC Turbo (2007)
Windshield Washer Switch: Testing and Inspection
Combination Switch (Wiper)
INSPECTION
-
Inspect the continuity between each connector terminal. If continuity is not as specified, replace the switch.
-
Intermittent operation inspection Inspect wiper switch separately
1. Set the voltmeter between switch terminal No.7 (+) and No. 2 (-).
2. Connect the battery between switch terminal No .17 (+) and No. 2 (-)
3. Turn the front wiper switch to INT.
4. Connect the battery (+) to switch terminal No. 16 for 5 seconds.
