Forester F4-2.5L SOHC (2004)
4. Temporarily tighten the bolt which installs front and center exhaust pipe assembly to hanger bracket.
5. Tighten the nuts which hold front exhaust pipe onto cylinder heads.
Tightening torque: 30 Nm (3.1 kgf-m, 22.4 ft. lbs.)
6. Install the under cover.
7. Tighten the bolts which install front and center exhaust pipe assembly to rear exhaust pipe.
Tightening torque: 18 Nm (1.8 kgf-m, 13.0 ft. lbs.)
8. Tighten the bolt which holds front and center exhaust pipe assembly to hanger bracket.
Tightening torque: 35 Nm (3.6 kgf-m, 26.0 ft. lbs.)
9. Lower the vehicle.
10. Connect the rear oxygen sensor connector.
