Forester F4-2.5L SOHC (2004)
2. Remove the two bolts which hold washer tank, and then disconnect the washer motor connector.
3. Disconnect the rear window glass washer hose from washer motor, then plug connection with a suitable cap.
4. Hang the washer tank away from working area.
5. Remove the spark plugs cord by pulling boot, not the cord itself.
6. Remove the spark plugs with spark plug sockets.
INSTALLATION
RH SIDE
1. Install in the reverse order of removal.
Tightening torque (Spark plug): 21 No.m (2.1 kegs.m, 15.2 ft.lb)
CAUTION: The above torque should be only applied to new spark plugs without oil on their threads. In case their threads are lubricated, the