Forester F4-2.5L SOHC (2004)
Throttle Cable/Linkage: Service and Repair
Accelerator Control Cable
REMOVAL
1. Remove the accelerator pedal.
2. Separate the accelerator cable and accelerator pedal.
INSTALLATION
1. Install in the reverse order of removal.
NOTE:
-
If the cable clamp is damaged, replace it with a new one.
-
Never fail to cover the outer cable end with boot.
-
Be careful not to kink the accelerator cable.
-
Do not apply grease to the throttle cable on engine side.
2. Adjustment after pedal installation.
