Forester F4-2.5L SOHC (2004)
Side Air Bag: Service and Repair
Airbag Connectors
DRIVER'S AIRBAG (AIRBAG HARNESS AND ROLL CONNECTOR), SIDE AIRBAG AND PRETENSIONER
How to disconnect:
1. Push the lock arm (A).
2. With the lock arm (A) pushed in, move the slide lock (B) in the direction of the arrow.
3. With the slide lock (B) pulled, remove the lock arm (A) to its original position, and then pull in the direction of the arrow and separate the
connector.
CAUTION: When pulling, be sure to hold onto the connector and not the wire.
How to connect:
Holding the connector, and push it in carefully until a connecting sound is heard.
CAUTION: Be sure to insert the connector in until it locks. Then pull on it gently to make sure that it is locked.
