Forester F4-2.5L SOHC (2004)
Wheel Speed Sensor: Service and Repair
Front ABS Sensor
Front ABS Sensor
REMOVAL
1) Disconnect the ground cable from battery.
2) Disconnect the front ABS sensor connector located next to the front strut mounting house in engine compartment.
3) Remove the bolts which secure sensor harness to strut.
4) Remove the bolts which secure sensor harness to body.
5) Remove the bolts which secure front ABS sensor to housing, and remove the front ABS sensor.
CAUTION:
^
Be careful not to damage the pole piece located at tip of the sensor and teeth faces during removal.
^
Do not pull the sensor harness during removal.
INSTALLATION