Forester F4-2.5L SOHC (2004)
8. Insert inhibitor switch and transmission connector into stay.
9. Install air breather hose.
10. Install oil cooler pipes.
11. Install the oil charger pipe with O-ring.
12. Insert the input shaft while turning lightly by hand. At this time, not to damage the bushing.
Normal protrusion A: 50 - 55 mm (1.97 - 2.17 inch)
13. Install the torque converter clutch assembly.
14. Install the transmission assembly to the vehicle.
DISASSEMBLY
1. Remove the snap ring, and take out the retaining plate, drive plates, driven plates.
