subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Torque Converter Clutch Case|Page 2658 > < Torque Converter Clutch Case|Page 2656
Page 4
background image

2. Remove snap ring, and take out the retaining plate, drive plates and driven plates.

3. Using ST1 and ST2, remove snap ring.

ST1 398673600 COMPRESSOR
ST2 498627100 SEAT

4. Take out clutch cover, spring retainer, high clutch piston and reverse clutch piston.

Torque Converter Clutch Case|Page 2658 > < Torque Converter Clutch Case|Page 2656