Forester F4-2.5L SOHC (2004)
5. Remove seal rings and lip seal from high clutch piston and reverse clutch piston.
ASSEMBLY
1. Install seal rings and lip seal to high clutch piston and reverse clutch piston.
2. Install high clutch piston to reverse clutch piston.
3. Install reverse clutch to high clutch drum. Align the groove on the reverse clutch piston with the groove on the high clutch drum during
installation.
4. Install spring retainer to high clutch piston.
5. Install ST to high clutch piston.
ST 498437000 HIGH CLUTCH PISTON