Forester F4-2.5L SOHC (2004)
11. Remove the shield cover.
12. Remove the propeller shaft.
13. Place the transmission jack under transmission.
NOTE: Make sure that the support plates of transmission jack don't touch the crossmember.
14. Remove the transmission rear crossmember halt
15. Lower the AT jack.
NOTE: Do not separate the AT jack and transmission.
16. Remove the oil cooler inlet and outlet pipe.
NOTE: When removing the outlet pipe, be careful not to lose balls and springs used with retaining screws.
17. Remove the front torque converter turbine speed sensor.
18. Remove the rear vehicle speed sensor.
19. Remove the oil pan.
