subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Rear Differential Front Oil Seal|Page 3030 > < Fluid - Differential|Capacity Specifications|Page 3025
Page 1
background image

Seals and Gaskets: Service and Repair
Rear Differential Front Oil Seal

Rear Differential Front Oil Seal 

REPLACEMENT 

1. Set the vehicle on a lift. 
2. Disconnect the ground cable from battery. 
3. Move the select lever or gear shift lever to "N". 
4. Release the parking brake. 

5. Remove the oil drain plug, and drain the gear oil.
6. Install the oil drain plug.

NOTE: Apply fluid packing to the drain plug. 

Tightening torque: 49 Nm (5.0 kgf-m, 3fi2 ft. lbs.) 

7. Jack-up the rear wheels and support the vehicle body with sturdy racks.
8. Remove the rear exhaust pipe and muffler.
9. Remove the propeller shaft from body.

10. Remove the self-locking nut while holding the companion flange with ST. 

ST 498427200 FLANGE WRENCH

11. Extract the companion flange using ST.

ST 399703600 PULLER ASSY

Rear Differential Front Oil Seal|Page 3030 > < Fluid - Differential|Capacity Specifications|Page 3025