Forester F4-2.5L SOHC (2004)
12. Remove the propeller shaft from transmission.
CAUTION:
^
Be careful not to damage the oil seals and frictional surface of sleeve yoke.
^
Cover the center exhaust pipe with a cloth to keep off any ATF or oil spilled from transmission when removing the propeller shaft.
13. Install the extension cap to transmission.
NOTE: If the extension cap is not available, place a vinyl bag over opening and fasten with string to prevent gear oil or ATF from leaking.
INSTALLATION
1. Insert the sleeve yoke into transmission, and then attach the center bearing to body.
Tightening torque: 52 Nm (5.3 kgf-m, 38.3 ft. lbs.)
2. Align the matching marks, and then connect the flange yoke and rear differential.
Tightening torque: 31 Nm (3.2 kgf-m, 23.1 ft. lbs.)
3. Using new bolts, install the differential mount front cover.
