Forester F4-2.5L SOHC (2004)
ST2 92739000 ADAPTER
11. Tighten a new axle nut to the specified torque with brake pedal depressed.
Tightening torque: 186 Nm (19 kgf-m, 137 ft. lbs.)
12. Lock the axle nut.
13. Install the ABS sensor bracket.
Tightening torque: 32 Nm (3.3 kgf-m, 24 ft. lbs.)
14. Add the transmission oil.
15. Install the wheel.
Front Drive Shaft Disassembly
DISASSEMBLY
1. Place alignment marks on the shaft and outer race.
2. Remove the AAR boot band and boot.
NOTE: Be careful not to damage the boot.
3. Remove the retainer from AAR outer race.
4. Remove the AAR outer race from shaft assembly.
5. Wipe off the grease.
NOTE: The grease is a special grease. Do not confuse with other greases.