Forester F4-2.5L SOHC (2004)
8. Connect the stay to transmission bracket.
Tightening torque: 18 Nm (1.8 kgf-m, 13.0 ft. lbs.)
9. Install the heat shield cover. (If equipped)
10. Install the rear exhaust pipe and muffler.
11. Lower the vehicle.
12. Install the plate COMPL to body.
Tightening torque: 7.S Nm (0.76 kgf-m, 5.5 ft. lbs.)
13. Install the boot and insulator assembly to vehicle in proper direction.
14. Install the clamp.
15. Install the console box.
DISASSEMBLY
1. Disassemble the lock wire.