Forester F4-2.5L SOHC (2004)
1. Install the rear cushion rubber.
Tightening torque: 35 Nm (3.6 kgf-m, 26 ft. lbs.)
2. Install the rear crossmember.
Tightening torque:
T1: 70 Nm (7.1 kgf-m' 51 ft. lbs.)
T2: 140 Nm (14.3 kgf-m, 103 ft. lbs.)
3. Remove the transmission jack.
4. Install the heat shield cover.
5. Install the front and center exhaust pipes.
6. Install the rear exhaust pipe and muffler.