subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Trunk / Liftgate Interior Trim Panel > < Power Trunk / Liftgate Lock Actuator|Testing and Inspection
Page 1
background image

Power Trunk / Liftgate Lock Actuator: Service and Repair

Rear Gate Latch and Actuator Assembly

REMOVAL

1. Disconnect the ground cable from the battery.
2. Remove the rear gate trim.
3. Remove two bolts.

4. Disconnect the connector, and remove the rear gate latch and actuator assembly.

INSTALLATION

Install in the reverse order of removal.

Trunk / Liftgate Interior Trim Panel > < Power Trunk / Liftgate Lock Actuator|Testing and Inspection