Forester F4-2.5L Turbo (2009)
Installation
INSTALLATION
CAUTION:
^
Be sure to use a new self-locking nut.
^
Always tighten the bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the ground.
1) Install in the reverse order of removal.
Tightening torque:
Refer to "COMPONENT" of "General Description" for the tightening torque.
2) Bleed air from brake system.
3) Inspect the wheel alignment and adjust if necessary.
4) Re-initialize the auto headlight beam leveler system (models with auto headlight beam leveler).
Inspection
INSPECTION
Check the removed parts for wear, damage and crack, and repair or replace them if faulty.