Forester F4-2.5L Turbo (2009)
Cowl Moulding / Trim: All Technical Service Bulletins
Body - Water Leak Onto Passenger Floor
NUMBER: 12-107-08
DATE: 09/26/08
APPLICABILITY: 2009 Forester
SUBJECT:
Water Leak, Front Passenger Side
INTRODUCTION
If you encounter a vehicle which has a water leak in the front passenger side of the vehicle, it may be coming from the cowl panel directly above the
HVAC fresh air intake. To correct the condition, the cowl panel seal will need to be trimmed.
PRODUCTION LINE CHANGE
The cowl panel seal was repositioned starting in late March, 2008 with VIN 9*718802.
PART INFORMATION
Note:
The cowl panel seal should only be replaced if it is damaged.
REPAIR PROCEDURE/ INFORMATION
The cowl panel removal and installation instructions are also published in the 2009 Forester Service Manual found on the STIS website.
^
Remove wiper arms.
^
Carefully remove the 7 clips that secure the cowl panel. The 3 clips in the middle can be removed using needle nose pliers as illustrated in the next
photo.