Forester F4-2.5L Turbo (2009)
INSTALLATION
1) Install in the reverse order of removal.
2) Adjust the parking brake.
INSPECTION
1) Check the rear wheel bearing play and axle hub runout before inspecting the disc rotor runout.
2) Secure the disc rotor by tightening the five wheel nuts.
3) Set a dial gauge 10 mm (0.39 in) inward from the disc rotor outer circumference. Rotate the disc rotor to check runout. If the runout of disc rotor
exceeds the service limit, grind the disc rotor. After grinding, check the thickness of the disc rotor according to the procedure in step 4).
Disc rotor runout limit: 0.05 mm (0.0020 in)
4) Set a micrometer 10 mm (0.39 in) inward from the disc rotor outer perimeter, and then measure the disc rotor thickness. If the thickness of the disc
rotor exceeds the service limit, replace with a new disc rotor.
