Forester F4-2.5L Turbo (2009)
10) Remove the cam sprocket LH.
11) Remove the belt cover LH No. 2.
12) Remove the tensioner bracket.
13) Disconnect the hose from water Pump.
14) Remove the water pump.
INSTALLATION
1) Install the water pump onto cylinder block LH.
NOTE:
^
Use a new gasket.
^
When installing the water pump, tighten the bolts in two stages in alphabetical sequence as shown in figure.
Tightening torque:
First: 12 N-m (1.2 kgf-m, 8.9 ft-lb)
Second: 12 N-m (1.2 kgf-m, 8.9 ft-lb)
