Forester F4-2.5L Turbo (2009)
16) Remove the bolts which hold the center exhaust pipe to the hanger bracket, and remove the center exhaust pipe.
CAUTION: Be careful not to drop the center exhaust pipe.
17) Remove the turbocharger lower cover.
18) Separate the center exhaust pipe (front) and center exhaust pipe (rear).
INSTALLATION
1) Assemble the center exhaust pipe (front) and center exhaust pipe (rear).
NOTE: Use a new gasket.
Tightening torque: 42.5 N-m (4.3 kgf-m, 31.3 ft-lb)
2) Set the turbo charger lower cover, and temporarily tighten the bolt holding the lower side of the turbo charger lower cover.
3) Install the center exhaust pipe and temporarily tighten the bolt which holds center exhaust pipe to hanger bracket.
4) Temporarily tighten the bolt which holds the center exhaust pipe to the transmission.
5) Connect the center exhaust pipe along with the turbo charger cover stay (A) to the turbocharger.
