Forester F4-2.5L Turbo (2009)
2) Set the round mark and arrow mark on cam sprocket to the position shown in the figure, and measure the #2 cylinder intake valve and #4
cylinder exhaust valve clearances.
3) Set the round mark and arrow mark on cam sprocket to the position shown in the figure, and measure the #1 cylinder exhaust valve and #4
cylinder intake valve clearances.
16) After inspection, install the related parts in the reverse order of removal.
NOTE:
^
Use a new rocker cover gasket.
^
For the PVC hose clamp, use a new clamp.
Sandwich the protruding part of the clamp with the ST and lock the clamp.
ST 18353AA000 CLAMP PLIERS
