Forester F4-2.5L Turbo (2009)
Air Filter Element: Service and Repair
Air Cleaner Element
REMOVAL
1. Disconnect the ground cable from battery.
2. Remove the air intake duct (rear).
3. Disconnect the connector (A) from mass air flow and intake air temperature sensor.
4. Remove the clip (B) from the air cleaner case.
5. Open the air cleaner case, and remove the air cleaner element.
INSTALLATION
Install in the reverse order of removal.
CAUTION: Be sure to use SUBARU genuine air cleaner element depending on the engine type when replacing the air cleaner elements.
Otherwise engine performance may be damaged.
NOTE: Check that there are no foreign objects in the air cleaner case.